Singer 6212c

Singer 6212c

Postby cschutter » Tue Sep 12, 2017 2:06 am

Back
View
211187Singer 6212c feed problem
cschutter07Today at 4:22 PM
Hi!
I have a singer 6212c that is not feeding fabric thru right. When it's set for stitch length 5, it feeds at about a stitch length 2 or 3 speed. When it's set to 3, the fabric doesn't feed at all.
I:
- Cleaned and oiled
- Made sure feed dogs are aligned left/right, front/back
They raise almost to the thickness of a nickle and touch the presser foot when fully elevated. They move in the appropriate direction when running.
- Opened the bottom and poked around: no obviously broken parts/missing screws. Cleaned out built up oil.
- Ran fabric thru without the needle. Same problem as stated
- This model doesn't have an option to lower the feed dogs or adjust presser foot pressure, so no adjustments there.

Somehow the feed dogs aren't working right and I'd love to figure out how to fix this! Thanks!
cschutter
 
Posts: 1
Joined: Mon Sep 11, 2017 2:34 am

Return to Singer

Who is online

Users browsing this forum: No registered users and 1 guest

cron